Steam / Coffee Boiler Compression Fitting Seal

1 x Replacement Teflon seal/gasket for version 2 and 3 boilers that have the newer style compression fittings. If yours is leaking and tightening doesn't resolve the problem then this will get you back up and running.

Price is for each.

Tips From the Technician:
“The nuts to get at these can be extremely tight - especially when the threads become scaled up. I use an impact driver fitted with what's called a Sensor socket - 15mm like this:

https://amzn.to/4lhqmeR

This allows me to fit it over while the tube is in the way. Before buying this I used a regular spanner and then gave it a few sharp strong taps with a hammer to get them moving. 

Once you get it off, the tube can also be a challenge. Heat can be used around the port to help free it up. Once the pipe is out, take out the centre pin and remove the old teflon seal and steel washers. Heat up the brass bush and slide it back up the pipe about 5 mm. This will give you enough space to cut off any damaged part of the tube and re-assemble"