Survive the Coffee Machine Apocalypse with Our Ultimate Dual Boiler Survival / Service Kit!
Whether it's a faulty pump, a buzzing solenoid, or a leaky seal, this kit allows you to carry out an essential service and/or repair of all the common faults these machines suffer from.
Compatible with all Breville and Sage Dual Boilers (240v and 120v).
Feel free to message me before purchasing if you need any advice before ordering. I can sometimes include other parts too that aren't listed.
Some of the problems this kit will fix are:
- Loss of preinfusion
- Buzzing / Faulty Solenoid
- Weak Pressure
- Leaking Seals
- Overheating / Underheating
- Dripping Steam Wand
- Dripping Hot Water Tap
- 3 beeps of death
- Steam boiler not filling
- Top water lid latch
PREMIUM O-RING SERVICE KIT
- 12x Small o-rings for hose connectors (water/steam) and NTC probes.
- 5x Large o-rings for thermal and water level probes.
- 1x 10g tube of Food Grade Silicone Grease
- 1x Vacuum Valve o-ring to fix leaking steam
- 1x spare hose clip
STEAM VALVE SERVICE KIT
Full set of seals used for the Breveille Dual Boiler Steam Valve. This will allow you to refurbish your valve and fix most leaking or dripping issues.
Note: The 008 o-ring is made from HNBR which is designed for high friction applications such as this. This is what Breville use. Do not use cheaper silicon orings for this part of the valve as they will not last!
SOLENOID SERVICE KIT
Replacement (Brand new Genuine OLAB and Breville made) solenoid piston plus seals for Breville Dual boilers with OLAB branded coffee solenoids.
This will resolve buzzing / most dispensing issues.
TRIAC REPAIR KIT
2x Replacement Triacs plus 1x Opto Isolator to repair 99% of Traic Board faults on the Breville Dual Boiler.
If your machine is has developed a heating problem caused by leaking orings, then this kit will save you money on a new board.
This kit includes a triac for the steam or coffee circuit and the group head circuit
These components will work on both 240v and 120v versions. SP0010242 / SP0001772
https://www.youtube.com/watch?v=yrz7l5y2xlA
PUMP SERVICE KIT
Fixes weak pressure or loss of pre-infusion on the Coffee Pump (EP5 / EFP5 & Post 2021 EFM) and Steam Pumps (NMEHP)
1x Polypropylene pump valve ball
1x EPDM Coffee pump piston oring
1x Steam pump piston oring
https://www.youtube.com/watch?v=Gcuq22CC5kc
STEAM + COFFEE/GROUP BOILER THERMAL FUSES
Should the worst happen, then this will get you back on track. You'll get both types of fuses to cover any of the thermal fuses in the machine. There is also a steam boiler thermal switch as you'll likely need this if your machine has the 3 beeps of death. And finally, some locking connectors (important as non locking ones often fall off) and some spare insulation tubing incase yours is too short.
https://www.youtube.com/watch?v=lcWhYbNrwV4
REPLACEMENT LID LATCH
Over time the top access panel latch can wear out or break off. We have you covered too with an easy to fit replacement.
2 X HOT WATER TAP SEALS
Two EPDM o-rings to repair leaking water spouts on the Breville Dual Boilers.
1 x GROUP SEAL
CABLE MANAGEMENT KIT
Includes all the connectors you'll need to carry out any of the repairs
For more info, please check out this channel on Youtube:
https://www.youtube.com/@BrevTech
⚠️ **DIY Installation Warning:** This product is intended for experienced users. Electrical repairs carry risk. We recommend using a qualified technician. See full disclaimer: https://brev-tech.com/pages/disclaimer